Double Glazing Lock Repairs

Quality locks on your windows and doors can stop burglars from getting into your home. They generally don't like breaking glass or slipping through windows that are not closed.

Certain double glazing owners however, have experienced problems with their window or door lock after the installation. Luckily, these problems can be fixed without having to buy new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window lock or door lock if damaged or is not working properly. They can fix hinges, striker plate and locks for double-glazing. They can also move the cylinder to correct any misalignment that may be causing your handle to work properly.

The mechanism might be jammed when the key fits into the lock, but it will not turn or be difficult to insert. Grease or dirt can get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. It is crucial to apply a dry lubricant like graphite or teflon instead of oil, which attracts dirt and stick to the interior of the mechanism. After lubricating the lock you must insert the key and try to turn it. The lubricant should work its way through the mechanism and the lock should be able turn easily.

A malfunctioning lock could be caused by loose screws in the mechanism of the lock. They can become loose and fall out, or even break off completely, preventing the lock to work properly. The screws can be tightened by using the help of a screwdriver. However, be careful not to over tighten them. This could cause damage to the internal components.

A damaged lock could be dangerous for both you and your family members, especially if you have small children. It can be easy for them to unlock the door without knowing and give them access to your home. If you're worried that this might happen, a vetted professional locksmith can help secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC doors and windows. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are damaged or are damaged

A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great choice for those worried about opportunistic thieves looking to gain access to your home. It's also worth asking your installer about anti-lift locks which can be put in in addition to the locks that are already in place to ensure that your window is secured in its closed position.

It's not uncommon for handle locks to become damaged or fail - they are the first component of your window that could be forced open by criminals who want to break into. The good news is that this is among the most straightforward parts to repair.

Modern handles made of aluminium and uPVC feature a multi-point locking system called Espagnolette which is designed to withstand forced entry. This security upgrade is offered as an option on new uPVC windows. As an optional upgrade, older style uPVC or aluminium handles that are no longer used can be upgraded to the shoot bolt locking system.

It is essential to fix handles as quickly as you can if it's damaged. A damaged handle can stop the window from closing correctly and allow drafts in. It could also be a weakness that thieves can take advantage of and put the belongings of your family and your personal belongings at risk.

The process of repairing the failed mechanism starts with gaining access to the window frame and then removing the damaged handle. The gearbox can then be accessed to determine the type of gearbox that is used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.

After the mechanism is replaced the handle can be reattached using the original screws. However, we recommend replacing them with larger screws as they will provide the most secure fit. The final step is to apply a layer of clear sealant to shield the handle from further rust. Once you've completed this step the window should be functioning again at a fraction of the cost of replacing it.

Broken or Faulty Hinges

If your windows aren't shut correctly, draughts may be able to enter, your home's security measures will be compromised and you run an increased chance of damp or water damage. Broken or damaged window hinges are a common problem that can be fixed easily.

If your windows made of uPVC won't open or shut it's likely that the hinges require to be replaced or repaired. While most window manufacturers require you to purchase a new window to resolve this simple issue We can replace the damaged hinges and save you money.

Window hinges are usually damaged by repeated use or weakened over time by corrosion. In the event of a broken hinge, it's crucial to take steps to prevent further damage by taking care not to force the window to open or close.

You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all window hinges. Talk to a professional before buying parts that do not work with your existing hardware. This could cause further damage.

The hinges that are not working properly can cause big issue for your uPVC windows and doors. They can be a significant source of noise, and they can also allow water infiltration that can cause damage to your windows.

To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If not then tap the headpin using the hammer to make a slight bend in the hinge barrel. This will help to keep the pin in place. Then, ask a helper to hold the door as you take the hinge screws and hinges from both the doorjamb and the door. Replace the hinges using those of a matching size and then attach the screws using glue. Finally, while the glue is drying, put a secure hold on the hinges with weights or clamps.

After you have repaired the hinges, you can put the door back in place. You can also reattach the handle. It is recommended to replace the screws using the same length of wood dowels as click here the original screw so that they match up with click here each other.

Broken or damaged glass

uPVC Windows can become damaged in time, despite the fact they are excellent at keeping out the cold and conserving the heat. This could include broken or damaged glass, as well as faulty locks. website If neglected, this could turn into a major expense. It can also affect the aesthetics of your home and may lead to a loss of insulation, which is why it's crucial to repair any damage as soon as you can.

If the glass is broken but isn't shattered it is possible to fix it yourself with the proper tools and methods. First, ensure that the area around the glass is free of debris so that any shards won't cause injury to anyone or are a trip hazard. Remove any broken glass pieces and dispose of them in a proper way. Then, apply masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane double glazed units near me before gluing it in place is a good idea in the case of windows with two panes. This will ensure you have enough space to finish your project.

Before applying the glue, wipe the entire surface of the broken frame and glass with a an unclean, dry cloth. Follow the application and curing instructions that may differ from product-to-product. Based on the angle of the crack, you may need to clamp the glass while it is curing. You can do this using lightweight clamps that are specifically designed to support fragile materials.

After the adhesive has completely set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash and the frame. Be cautious not to flex the window as it's being installed, as this could weaken the seal and lead to condensation and water infiltration.

If you have a glass door that's completely read more broken or has larger cracks, contact a professional glazier like O'Brien(r) to arrange a replacement. It's important to act quickly in the event of broken glass.